How Our Concrete Calculators Work
How our concrete calculators work is no secret: each one takes your measurements, turns them into a volume in cubic feet, divides by 27 to get cubic yards, and divides that volume by a bag's published yield to get a bag count. The formulas are the standard ones every concrete supplier and engineer uses, the bag yields come straight off the manufacturers' data sheets, and the default prices live in one editable file. This page lays all of it out so you can check any number the tools give you by hand. There is no sign-up, and the math runs in your browser with nothing sent anywhere.
The formulas we use
Every shape comes down to one idea: volume equals area times depth, then divide by 27 to turn cubic feet into cubic yards, because a cubic yard is 3 ft by 3 ft by 3 ft, which is 27 cubic feet. The only thing that changes from one calculator to the next is how the area is worked out.
Slabs, footings, walls and pads are rectangles, so the volume is simply the three dimensions multiplied together, all converted to feet first:
cubic feet = length (ft) × width (ft) × thickness (ft)
cubic yards = cubic feet ÷ 27
Columns, sonotubes and round piers use the area of a circle instead, so the radius is squared and multiplied by pi:
cubic feet = π × radius (ft)² × height (ft)
cubic yards = cubic feet ÷ 27
A worked example: a 10 ft by 10 ft slab poured 4 inches thick. Four inches is 0.333 ft, so the volume is 10 × 10 × 0.333 = 33.3 cubic feet, and 33.3 ÷ 27 = 1.23 cubic yards. That is the whole calculation. The inch-to-foot conversions and the rounding happen inside the tool, but the arithmetic is exactly this, and you can repeat it on paper.
How many bags that is
To count bags, the calculator divides the volume in cubic feet by what one bag yields once it is mixed, then rounds up, because you cannot buy part of a bag. The yields are not ours to choose: they are printed on the manufacturers' data sheets.
80 lb bag
0.60
cubic feet per bag, so 45 bags make a cubic yard.
60 lb bag
0.45
cubic feet per bag, so 60 bags make a cubic yard.
40 lb bag
0.30
cubic feet per bag, so 90 bags make a cubic yard.
Those yields come from Quikrete's Concrete Mix (No. 1101) data sheet, and Sakrete's standard mix matches them. The bags-per-yard figures are just 27 divided by each yield: 27 ÷ 0.60 is 45, 27 ÷ 0.45 is 60, 27 ÷ 0.30 is 90. The fence-post tools use the 50 lb fast-setting bag instead, which yields 0.375 cubic feet per Quikrete's fast-setting data sheet, so it takes 72 of those to fill a yard.
Where the prices come from
The cost tools add two things on top of the volume: material and delivery. Ready-mix is priced per cubic yard, with a short-load fee added on loads under a full truck, since the supplier's cost of sending the truck does not shrink with a small order. Bagged concrete is priced per bag at its size.
Every default price lives in a single file, so one edit flows to all of the calculators at once. They are rough US averages, each labeled with the date it was last reviewed, and every cost calculator lets you type your own number over the default before it does the math. The delivered default is about $160 a cubic yard, which is the average selling price the ready-mix industry reports in its own benchmarking survey; the cost per yard of concrete guide works through where that figure comes from and why published prices disagree. To price your own pour, the concrete cost calculator totals material, delivery and the short-load fee for the volume you enter.
Why we add 10 percent
By default the calculators round the order up by 10 percent. Subgrade is never perfectly flat, forms spread, some concrete sticks in the barrow, and a little gets spilled, so the hole always takes more than its paper dimensions. The National Ready Mixed Concrete Association's own ordering guidance is to buy 4 to 10 percent more than the volume calculated from plan dimensions, and Sakrete's estimating guide says plainly that "it's always a good idea to add 10% to every estimate."
The ten percent is added to the order, not to the net volume the shape actually holds, and running short mid-pour, with a cold joint forming while you wait on more concrete, is a far worse outcome than one spare bag. The bags per yard guide shows the counts with and without that cushion.
How accurate it is, and what it cannot know
The volume math is exact. One cubic yard is always 27 cubic feet, and the bag counts match the manufacturers' published yields bag for bag, so the tool is as accurate as the measurements you feed it. Measure the thickness in a few places and use the deepest, because that is what the ground will take.
What a calculator cannot see is your site. It does not know how far the subgrade dips, how much you over-excavate, or what a yard costs from your local plant this week, which is why the 10 percent cushion is there and why the cost figures are editable defaults rather than quotes. For anything structural, the mix strength and rebar still need an engineer or your local code.
On privacy, there is little to say and that is the point: the tools ask for no sign-up and collect nothing, the arithmetic runs entirely in your browser, and nothing you type is sent anywhere. All of the page content works with JavaScript turned off; only the live calculation needs it. For the numbers behind a specific tool, the yardage by shape guide and the how much does concrete cost guide go deeper than any single calculator page.
Frequently asked questions
What formula do your concrete calculators use?
Volume equals length times width times thickness, all in feet, divided by 27 to get cubic yards. Round shapes like columns and sonotubes use pi times the radius squared times the height instead. A 10 by 10 ft slab 4 inches thick is 10 × 10 × 0.333 = 33.3 cubic feet, or 1.23 cubic yards.
How many bags of concrete are in a cubic yard?
45 bags of 80 lb mix, 60 bags of 60 lb, or 90 bags of 40 lb. Each figure is 27 cubic feet divided by what one bag yields once mixed: 0.60, 0.45 and 0.30 cubic feet, the yields printed on the manufacturers' data sheets.
Where do your bag yields come from?
From the manufacturers. Quikrete's Concrete Mix (No. 1101) data sheet lists an 80 lb bag at about 0.60 cubic feet, a 60 lb at 0.45 and a 40 lb at 0.30, and Sakrete's standard mix matches. The calculators divide your volume by the yield and round up, because bags are sold whole.
Do the calculators add waste?
Yes, 10 percent by default, added to the order rather than to the net volume. The National Ready Mixed Concrete Association recommends buying 4 to 10 percent more than the calculated volume, because subgrade dips, forms spread and some concrete is always lost. You can see the counts with and without the cushion.
Are the calculators free, and is my data private?
Free, with no sign-up. The math runs entirely in your browser and nothing you type is sent anywhere. All of the page content works with JavaScript turned off; only the live calculation needs it.